BW – BV

Anti-vibrating monospring mounts BW.. – BV.. line

Antivibrating monospring mounts BW width=

Height: 100 mm

CONSTRUCTIVE CHARACTERISTICS

  • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
  • n° 2 disks containing the spring with adequate thickness in alluminum.
  • n° 2 disks with sleeves to lock the spring to the plates. The compass has one M8 hole, used to anchorate it and/or for jacks use.

On request:

  • Dusty epoxy painting for the spring as our RAL schedule.
  • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

download

BWr – BVr

Anti-vibrating monospring mounts line BWr.. – BVr.. line

antivibrating monospring mounts line BWr.. - BVr.. line

Height: 80 mm

CONSTRUCTIVE CHARACTERISTICS

  •  n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
  • n° 2 disks containing the spring with adequate thickness in alluminum. 
  • n° 2 disks with sleeves to lock the spring to the plates. The compass has one M8 hole, used to anchorate it and/or for jacks use.

On request:

  • Dusty epoxy painting for the spring as our RAL schedule.
  • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

 
download

BF

Anti-vibrating monospring mounts BF.. line

Antivibrating BF

Height: 80 mm

CONSTRUCTIVE CHARACTERISTICS

  • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
  • n° 2 disks containing the spring with adequate thickness in alluminum.
  • n° 2 disks with sleeves to lock the spring to the plates. The compass has one M8 hole, used to anchorate it and/or for jacks use.

On request:

  • Dusty epoxy painting for the spring as our RAL schedule.
  • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

download

BFr

Anti-vibrating monospring mounts BFr.. line

Antivibrating monospring mounts BFr.. line

Height: 65 mm

CONSTRUCTIVE CHARACTERISTICS

  • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
  • n° 2 disks containing the spring with adequate thickness in alluminum.
  • n° 2 disks with sleeves to lock the spring to the plates. The compass has one M8 hole, used to anchorate it and/or for jacks use.

On request:

  • Dusty epoxy painting for the spring as our RAL schedule.
  • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

download