PWH – PVH

Anti-vibrating monospring mounts PWH.. – PVH.. line

Antivibrating monospring mounts PWH.. - PVH.. lineHeight: 144 mm 

CONSTRUCTIVE CHARACTERISTICS 

  • n° 1 spring made of harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. 
  • n° 2 plates containing the spring. The head consist of a steel element with hole coated thermoplastic with high resistance against hydrocarbons, aging and the ozone, stamped by injection, the base is a steel element coated with zinc and furnished with holes for the anchorage to the floor.
  • n° 2 shaped disks with sleeve for the spring locking to the plates. A sleeve with a hole M8 is used for the anchorage to the base of the suspended machine or for the jack insertion.
  • n° 1 gasket  with anti-oil elastomer stuck on the base permits to the mount to stand for friction and reduce the transmission of noises caused by the high frequencies. 

On request:

  • Dusty epoxy painting for the springs as our RAL schedule.
  • Jack available in stainless steel or steel coated with zinc AISI 304, it is recommended to gauge the machine.

 
download

PW – PV

Anti-vibrating monospring mounts PW.. – PV.. line

Antivibrating monospring mounts PW.. - PV.. lineHeight: 114 mm 

CONSTRUCTIVE CHARACTERISTICS

  • n° 1 spring made of harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
  • n° 2 plates containing the spring. The head consist of a steel element with hole coated thermoplastic with high resistance against hydrocarbons, aging and the ozone, stamped by injection, the base is a steel element coated with zinc and furnished with holes for the anchorage to the floor.
  • n° 2 shaped disks with sleeve for the spring locking to the plates. A sleeve with a hole M8 is used for the anchorage to the base of the suspended machine or for the jack insertion.
  • n° 1 gasket  with anti-oil elastomer stuck on the base permits to the mount to stand for friction and reduce the transmission of noises caused by the high frequencies.

On request:

  • Dusty epoxy painting for the springs as our RAL schedule.
  • Jack available in stainless steel or steel coated with zinc AISI 304, it is recommended to gauge the machine.

download

PWr – PVr

Anti-vibrating monospring mounts PWr.. – PVr.. line

Antivibrating monospring mounts PWr.. - PVr.. lineHeight: 94 mm 

CONSTRUCTIVE CHARACTERISTICS

  • n° 1 spring made of harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
  • n° 2 plates containing the spring. The head consist of a steel element with hole coated thermoplastic with high resistance against hydrocarbons, aging and the ozone, stamped by injection, the base is a steel element coated with zinc and furnished with holes for the anchorage to the floor.
  • n° 2 shaped disks with sleeve for the spring locking to the plates. A sleeve with a hole M8 is used for the anchorage to the base of the suspended machine or for the jack insertion.
  • n° 1 gasket  with anti-oil elastomer stuck on the base permits to the mount to stand for friction and reduce the transmission of noises caused by the high frequencies.

On request:

  • Dusty epoxy painting for the springs as our RAL schedule.
  • Jack available in stainless steel or steel coated with zinc AISI 304, it is recommended to gauge the machine.

download

PF

Anti-vibrating monospring mounts PF.. line

Antivibrating monospring mounts PF.. lineHeight: 89 mm 

CONSTRUCTIVE CHARACTERISTICS 

  • n° 1 spring made of harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. 
  • n° 2 plates containing the spring. The head consist of a steel element with hole coated thermoplastic with high resistance against hydrocarbons, aging and the ozone, stamped by injection, the base is a steel element coated with zinc and furnished with holes for the anchorage to the floor.
  • n° 2 shaped disks  and sleeve for the spring locking to the plates. A sleeve with a hole M8 is used for the anchorage to the base of the suspended machine or for the jack insertion
  • n° 1 gasket  with anti-oil elastomer stuck on the base permits to the mount to stand for friction and reduce the transmission of noises caused by the high frequencies. 

On request:

  • Dusty epoxy painting for the springs as our RAL schedule.
  • Jack available in stainless steel or steel coated with zinc AISI 304, it is recommended to gauge the machine.

 
download

PFr

Anti-vibrating monospring mounts PFr.. line

Antivibrating monospring mounts PFr.. lineHeight: 74 mm 

CONSTRUCTIVE CHARACTERISTICS

  • n° 1 spring made of harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. 
  • n° 2 plates containing the spring. The head consist of a steel element with hole M8, coated thermoplastic with high resistance against hydrocarbons, aging and the ozone, stamped by injection, the base is a steel element coated with zinc and furnished with holes for the anchorage to the floor.
  • n° 2 shaped disks with sleeve M8 for the spring locking to the plates. A sleeve with a hole M8 is used for the anchorage to the base of the suspended machine or for the jack insertion. 
  • n° 1 gasket  with anti-oil elastomer stuck on the base permits to the mount to stand for friction and reduce the transmission of noises caused by the high frequencies. 

On request:

  • Dusty epoxy painting for the springs as our RAL schedule.
  • Jack available in stainless steel or steel coated with zinc AISI 304, it is recommended to gauge the machine.

 
download

PFb

Anti-vibrating monospring mounts PFb.. line

Antivibrating monospring mounts PFb.. line - Height: 59 mHeight: 59 mm 

CONSTRUCTIVE CHARACTERISTICS

  • n° 1 spring made of harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
  • n° 2 plates containing the spring. The head consist of a steel element with hole M8, coated thermoplastic with high resistance against hydrocarbons, aging and the ozone, stamped by injection, the base is a steel element coated with zinc and furnished with holes for the anchorage to the floor.
  • n° 2 shaped disks with sleeve M8 for the spring locking to the plates. A sleeve with a hole M8 is used for the anchorage to the base of the suspended machine or for the jack insertion.
  • n° 1 gasket  with anti-oil elastomer stuck on the base permits to the mount to stand for friction and reduce the transmission of noises caused by the high frequencies.

On request:

  • Dusty epoxy painting for the springs as our RAL schedule.
  • Jack available in stainless steel or steel coated with zinc AISI 304, it is recommended to gauge the machine.

download