Multiple Springs Mounts – G… line

Multiple Springs Mounts – Serie: G… line

  • GWr – GVr

    Anti-vibrating multispring mounts GVr.. – GVr.. line

    Antivibrating multispring mounts GVr.. - GVr.. lineHeight: 103 mm CONSTRUCTIVE CHARACTERISTICS

    • n° 7 springs in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 zinc steel plates 5mm thick containing the springs, coated thermoplastic with high resistance against the hydrocarbons and the ozone, stamped by injection. The plate surface is provided with anti-skid deformable rolls for a frictional standing of the mount. Each spring is fastened on the plate with adhesive.

    On request:

    • Dusty epoxy painting for the springs as our RAL schedule.
    • JACK in stainless steel with zinc or stainless steel inox, M16 or M20 with reduction to M16. AISI 304, it is recommended to gauge the machine.
    • For high loads it’s recommended to use the PLATE in zinc steel as “JACK HOLDER”. The plate consent to distribute uniformly the load on the anti-vibration mount.
    • REDUCED PLATE AS JACK HOLDER coated with zinc to be used to gange the heighness of the anti-vibration

    download

  • GW – GV

    Anti-vibrating multispring mounts GW.. – GV.. line

    antivibrating multispring mounts GW.. - GV.. line Height: 123 mm CONSTRUCTIVE CHARACTERISTICS

    • n° 7 springs in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 zinc steel plates  5mm thick containing the springs, coated in thermoplastic with high resistance against the hydrocarbons and the ozone, stamped by injection. The plate surface is provided with anti-skid deformable rolls for a frictional standing of the mount. Each spring is fastened on the plate with adhesive.

    On request:

    • Dusty epoxy painting for the springs as our RAL schedule.
    • JACK in stainless steel with zinc or stainless steel inox, M16 or M20 with reduction to M16. AISI 304, it is recommended to gauge the machine.
    • For high loads it’s recommended to use the PLATE in zinc steel as “JACK HOLDER”. The plate consent to distribute uniformly the load on theanti-vibration mount.
    • REDUCED PLATE AS JACK HOLDER coated with zinc to be used to gange the heighness of the anti-vibration mount when it’s installed with other mounts provided with the plate.

    download

  • GWH – GVH

    Anti-vibrating multispring mounts GWH.. – GVH.. line

    antivibrating multispring mounts GWH.. - GVH.. lineHeight: 153 mm CONSTRUCTIVE CHARACTERISTICS

    • n° 7 springs in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 zinc steel plates  5mm thick containing the springs, coated in thermoplastic with high resistance against the hydrocarbons and the ozone, stamped by injection. The plate surface is provided with anti-skid deformable rolls for a frictional standing of the mount. Each spring is fastened on the plate with adhesive.

    On request:

    • Dusty epoxy painting for the springs as our RAL schedule.
    • JACK in stainless steel with zinc or stainless steel inox, M16 or M20 with reduction to M16. AISI 304, it is recommended to gauge the machine.
    • For high loads it’s recommended to use the PLATE in zinc steel as “JACK HOLDER”. The plate consent to distribute uniformly the load on the anti-vibration mount.
    • REDUCED PLATE AS JACK HOLDER coated with zinc to be used to gange the heighness of the anti-vibration mount when it’s installed with other mounts provided with the plate.

    download


For other information, feel free to contact us.