RZr – RXr

Anti-vibration multispring mounts RZr.. – RXz.. line

Antivibration multispring mounts RZr.. - RXz.. lineHeight: 87 mm CONSTRUCTIVE CHARACTERISTICS

  • n° 7 springs in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
  • n° 2 zinc steel plates  5mm thick containing the springs, coated in thermoplastic with high resistance against the hydrocarbons and the ozone, stamped by injection. The plate surface is provided with anti-skid deformable rolls for a frictional standing of the mount. Each spring is fastened on the plate with adhesive.

On request:

  • Dusty epoxy painting for the springs as our RAL schedule.
  • JACK M12, M16 or M20 with reduction to M16 in stainless steel with zinc or stainless steel inox, AISI 304, it is recommended to gauge the machine.
  • For high loads it’s recommended to use the PLATE in zinc steel as “JACK HOLDER”. The plate consent to distribute uniformly the load on the anti-vibration mount.
  • REDUCED PLATE AS JACK HOLDER coated with zinc to be used to gange the heighness of the anti-vibration mount when it’s installed with other mounts provided with the plate.

download