Multiple Springs Mounts – RF… line

Multiple Springs Mounts – RF… line

  • RFb Zb – RFb Xb

    Anti-vibration multispring mounts RFb..Zb – RFb..Xb line

    Antivibration multispring mounts RFb..Zb - RFb..Xb lineHeight: 72 mm  CONSTRUCTIVE CHARACTERISTICS

    • n° 7 springs in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 zinc steel plates 5mm thick containing the springs, coated in thermoplastic with high resistance against the hydrocarbons and the ozone, stamped by injection. The plate surface is provided with anti-skid deformable rolls for a frictional standing of the mount. Each spring is fastened on the plate with adhesive.

    On request:

    • Dusty epoxy painting for the springs as our RAL schedule.
    • JACK M12, M16 or M20 with reduction to M16 in stainless steel with zinc or stainless steel inox, AISI 304, it is recommended to gauge the machine.
    • For high loads it’s recommended to use the PLATE in zinc steel as “JACK HOLDER”. The plate consent to distribute uniformly the load on the anti-vibration mount.
    • REDUCED PLATE AS JACK HOLDER coated with zinc to be used to gange the heighness of the anti-vibration mount when it’s installed with other mounts provided with the plate.

    download

  • RFr Zr – RFr Xr

    Anti-vibrating multispring mounts RFr..Zr.. – RFr..Xr.. line

    Antivibrating multispring mounts RFr..Zr.. - RFr..Xr.. lineHeight: 87 mm  CONSTRUCTIVE CHARACTERISTICS

    • n° 7 springs in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 zinc steel plates  5mm thick containing the springs, coated in thermoplastic with high resistance against the hydrocarbons and the ozone, stamped by injection. The plate surface is provided with anti-skid deformable rolls for a frictional standing of the mount. Each spring is fastened on the plate with adhesive.

    On request:

    • Dusty epoxy painting for the springs as our RAL schedule.
    • JACK in stainless steel with zinc or stainless steel inox, M16 or M20 with reduction to M16. AISI 304, it is recommended to gauge the machine.
    • For high loads it’s recommended to use the PLATE in zinc steel as “JACK HOLDER”. The plate consent to distribute uniformly the load on the anti-vibration mount.
    • REDUCED PLATE AS JACK HOLDER coated with zinc to be used to gange the heighness of the anti-vibration mount when it’s installed with other mounts provided with the plate.

    download

  • RF Z – RF X

    Anti-vibrating multispring mounts RF..Z.. – RF..X.. line

    Antivibrating multispring mounts RF..Z.. - RF..X.. lineHeight: 102 mm  CONSTRUCTIVE CHARACTERISTICS

    • n° 7 springs in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 zinc steel plates  5mm thick containing the springs, coated in thermoplastic with high resistance against the hydrocarbons and the ozone, stamped by injection. The plate surface is provided with anti-skid deformable rolls for a frictional standing of the mount. Each spring is fastened on the plate with adhesive.

    On request:

    • Dusty epoxy painting for the springs as our RAL schedule.
    • JACK in stainless steel with zinc or stainless steel inox, M16 or M20 with reduction to M16. AISI 304, it is recommended to gauge the machine.
    • For high loads it’s recommended to use the PLATE in zinc steel as “JACK HOLDER”. The plate consent to distribute uniformly the load on the anti-vibration mount.
    • REDUCED PLATE AS JACK HOLDER coated with zinc to be used to gange the heighness of the anti-vibration mount when it’s installed with other mounts provided with the plate.

    download


For other information, feel free to contact us.