Single Spring Mounts – B… line

Single Spring Mounts – Load up to 380Kg..

  • BFr

    Anti-vibrating monospring mounts BFr.. line

    Antivibrating monospring mounts BFr.. line

    Height: 65 mm

    CONSTRUCTIVE CHARACTERISTICS

    • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 disks containing the spring with adequate thickness in alluminum.
    • n° 2 disks with sleeves to lock the spring to the plates. The compass has one M8 hole, used to anchorate it and/or for jacks use.

    On request:

    • Dusty epoxy painting for the spring as our RAL schedule.
    • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

    download

  • BF

    Anti-vibrating monospring mounts BF.. line

    Antivibrating BF

    Height: 80 mm

    CONSTRUCTIVE CHARACTERISTICS

    • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 disks containing the spring with adequate thickness in alluminum.
    • n° 2 disks with sleeves to lock the spring to the plates. The compass has one M8 hole, used to anchorate it and/or for jacks use.

    On request:

    • Dusty epoxy painting for the spring as our RAL schedule.
    • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

    download

  • BWr – BVr

    Anti-vibrating monospring mounts line BWr.. – BVr.. line

    antivibrating monospring mounts line BWr.. - BVr.. line

    Height: 80 mm

    CONSTRUCTIVE CHARACTERISTICS

    •  n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 disks containing the spring with adequate thickness in alluminum. 
    • n° 2 disks with sleeves to lock the spring to the plates. The compass has one M8 hole, used to anchorate it and/or for jacks use.

    On request:

    • Dusty epoxy painting for the spring as our RAL schedule.
    • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

     
    download

  • BW – BV

    Anti-vibrating monospring mounts BW.. – BV.. line

    Antivibrating monospring mounts BW width=

    Height: 100 mm

    CONSTRUCTIVE CHARACTERISTICS

    • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 disks containing the spring with adequate thickness in alluminum.
    • n° 2 disks with sleeves to lock the spring to the plates. The compass has one M8 hole, used to anchorate it and/or for jacks use.

    On request:

    • Dusty epoxy painting for the spring as our RAL schedule.
    • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

    download

For other information about our products, please visit this page.