Single spring mounts – M… line

Single spring mounts – Load up to 380Kg.

  • MFb

    Anti-vibrating monospring mounts MFb.. line

    Antivibrating monospring mounts MFb.. lineHeight: 56 mm   CONSTRUCTIVE CHARACTERISTICS

    • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 plates of a steel containing the spring element with adequate thick coated elastomer with high mechanical resistance to hydrocarbons and aging.The contact surfaces are provided with deformable rolls for a frictional standing of the mount.
    • n° 2 disks with sleeves to lock the spring to the plates and 1 holes M8 permit to the anchorage or the jack use.
    On request:
    • Dusty epoxy painting for the spring as our RAL schedule.
    • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

    download

  • MFr

    Anti-vibrating monospring mounts MFr.. line

    Antivibrating monospring mounts MFr.. lineHeight: 71 mm 

    CONSTRUCTIVE CHARACTERISTICS

    • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 plates of a steel containing the spring element with adequate thick coated elastomer with high mechanical resistance to hydrocarbons and against aging. The contact surfaces are provided with deformable rolls for a frictional standing of the mount.
    • n° 2 disks with sleeves to lock the spring to the plates. The compass has one M8 hole, used to anchorate it and/or for jacks use.

    On request:

    • Dusty epoxy painting for the spring as our RAL schedule.
    • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

    download

  • MF

    Anti-vibrating monospring mounts MF.. line

    Antivibrating monospring mounts MF.. lineHeight: 86 mm 

    CONSTRUCTIVE CHARACTERISTICS

    • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 plates of a steel containing the spring element with adequate thick coated elastomer with high mechanical resistance to hydrocarbons and against aging. The contact surfaces are provided with deformable rolls for a frictional standing of the mount.
    • n° 2 disks with sleeves to lock the spring to the plates. The compass has one M8 hole, used to anchorate it and/or for jacks use.

    On request:

    • Dusty epoxy painting for the spring as our RAL schedule.
    • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

    download

  • MWr – MVr

    Anti-vibrating monospring mounts MWr.. – MVr.. line

    Antivibrating monospring mounts MWr.. - MVr.. lineHeight: 86 mm 

    CONSTRUCTIVE CHARACTERISTICS

    • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 plates of a steel containing the spring element with adequate thick coated elastomer with high mechanical resistance to hydrocarbons and against aging. The contact surfaces are provided with deformable rolls for a frictional standing of the mount.
    • n° 2 disks with sleeves to lock the spring to the plates. The compass has one M8 hole, used to anchorate it and/or for jacks use.

    On request:

    • Dusty epoxy painting for the spring as our RAL schedule.
    • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

     
    download

  • MW – MV

    Anti-vibrating monospring mounts line MW.. – MV.. line

    Antivibrating monospring mounts line MW.. - MV.. lineHeight: 106 mm 

    CONSTRUCTIVE CHARACTERISTICS

    • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment.
    • n° 2 plates of a steel containing the spring element with adequate thick coated elastomer with high mechanical resistance to hydrocarbons and against aging. The contact surfaces are provided with deformable rolls for a frictional standing of the mount.
    • n° 2 disks with sleeves to lock the spring to the plates. The compass has one M8 hole, used to anchorate it and/or for jacks use.

    On request:

    • Dusty epoxy painting for the spring as our RAL schedule.
    • Jack M8, M10/8 or M12/8 available in stainless steel or steel coated with zinc, it is recommended to gauge the machine.

     
    download


Take a look to all our products, on this page.