Single spring mounts – PMNa… line

Single spring mounts – PMNa… line

  • PMNaZc

    Anti-vibrating monospring mounts PMNaZc.. line

    Antivibrating monospring mounts PMNaZc.. line

    Height: 51 mm

    CONSTRUCTIVE CHARACTERISTICS 

    • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. Each spring is fastened on the plate with adhesive
    • n° 2 plates containing the spring made of elastomer. The anchorage base is proposed in the standard version with a thread M8. The plate surface is provided with anti-skid deformable rolls for a frictional standing of the mount.
    • Base plate in steel adequate thick coated with zinc and furnished with holes for the anchorage to the floor.
    • n° 1 neoprene gasket placed on the base plate provided with anti-skid deformable rolls for a frictional standing of the mount .

    The type MNa.. is proposed for an optimum isolation with a frequency = > 10 Hz (600 rpm) for the indicated loads in the schedule, and for the tangential forces blocking.

    On request:

    • Jack M8  it is recommended to gauge the suspended machine.
    • Available versions for use in environment with saltern fog and/or agressive agents for temperature from –50 to +130 °C.

    download

  • PMNaZb – PMNaXb

    Anti-vibrating monospring mounts PMNaZb.. – PMNaXb.. line

    Antivibrating monospring mounts PMNaZb.. - PMNaXb.. line

    Height: 61 mm

    CONSTRUCTIVE CHARACTERISTICS 

    • n° 1 spring in harmonic steel UNI EN 10270-1 SH with surface protected by cataphoretic treatment. Each spring is fastened on the plate with adhesive
    • n° 2 plates containing the spring made of elastomer. The anchorage base is proposed in the standard version with a thread M8. The plate surface is provided with anti-skid deformable rolls for a frictional standing of the mount.
    • Base plate in steel adequate thick coated with zinc and furnished with holes for the anchorage to the floor.
    • n° 1 neoprene gasket placed on the base plate provided with anti-skid deformable rolls for a frictional standing of the mount.

    The type MNa.. is proposed for an optimum isolation with a frequency = > 10 Hz (600 rpm) for the indicated loads in the schedule, and for the tangential forces blocking.

    On request:

    • Jack M8  it is recommended to gauge the suspended machine.
    • Available versions for use in environment with saltern fog and/or agressive agents for temperature from –50 to +130 °C.

    download


Take a look to all our products, on this page.